Cable lug
Xogta Farsamada
Qalabka: E-Cu
Daaweynta dusha sare: qasacad-plated
Hantida Alaabta: Waxaa loo isticmaalaa in lagu xidho dhamaadka kirishbooyada naxaasta.Waxay leedahay daaqad daawasho si loo hubiyo goobta kirishbooyada.
| Qaabka | L Cabirrada (mm) d Φ | ||
| JM (JGK) 6-5 | 25 | 3.7 | 5.2 |
| JM (JGK) 6-6 | 25 | 3.7 | 6.5 |
| JM (JGK) 6-8 | 25 | 3.7 | 8.4 |
| JM (JGK) 10-5 | 26 | 4.5 | 5.3 |
| JM (JGK) 10-6 | 26 | 4.5 | 6.5 |
| JM (JGK) 10-8 | 26 | 4.5 | 8.4 |
| JM (JGK) 10-10 | 28 | 4.5 | 10.3 |
| JM (JGK) 16-6 | 28.5 | 5.7 | 6.5 |
| JM (JGK) 16-8 | 30.5 | 5.7 | 8.4 |
| JM (JGK) 16-10 | 31 | 5.7 | 10.5 |
| JM (JGK) 25-6 | 35 | 7.2 | 6.5 |
| JM (JGK) 25-8 | 35 | 7.2 | 8.4 |
| JM (JGK) 25-10 | 35 | 7.2 | 10.5 |
| JM (JGK) 35-6 | 37.5 | 8.5 | 6.5 |
| JM (JGK) 35-8 | 38 | 8.5 | 8.5 |
| JM (JGK) 35-10 | 39 | 8.5 | 10.5 |
| JM (JGK) 35-12 | 39 | 8.5 | 13 |
| JM (JGK) 50-6 | 43.5 | 9.8 | 6.5 |
| JM (JGK) 50-8 | 45 | 9.8 | 8.5 |
| JM (JGK) 50-10 | 45 | 9.8 | 10.5 |
| JM (JGK) 50-12 | 45 | 9.8 | 13 |
| JM (JGK) 50-14 | 45 | 9.8 | 14.5 |
| JM (JGK) 70-8 | 50 | 11.5 | 8.5 |
| JM (JGK) 70-10 | 51.5 | 11.5 | 10.5 |
| JM (JGK) 70-12 | 51.5 | 11.5 | 13 |
| JM (JGK) 95-8 | 58.5 | 13.7 | 8.5 |
| JM (JGK) 95-10 | 58.5 | 13.7 | 10.5 |
| JM (JGK) 95-12 | 58.5 | 13.7 | 13 |
| Qaabka | L Cabirrada (mm) Φ d | ||
| JM (JGK) 120-10 | 63.5 | 15 | 10.5 |
| JM (JGK) 120-12 | 65 | 15 | 13 |
| JM (JGK) 120-14 | 65 | 15 | 14.7 |
| JM (JGK) 120-16 | 66.5 | 15 | 17 |
| JM (JGK) 150-10 | 73 | 16.7 | 10.5 |
| JM (JGK) 150-12 | 73 | 16.7 | 13 |
| JM (JGK) 150-14 | 73 | 16.7 | 14.7 |
| JM (JGK) 150-16 | 73 | 16.7 | 17 |
| JM (JGK) 185-10 | 80 | 19.2 | 10.5 |
| JM (JGK) 185-12 | 80 | 19.2 | 13 |
| JM (JGK) 185-14 | 80 | 19.2 | 14.7 |
| JM (JGK) 185-16 | 80 | 19.2 | 17 |
| JM (JGK) 240-12 | 92.5 | 21 | 13 |
| JM (JGK) 240-14 | 92.5 | 21 | 14.7 |
| JM (JGK) 240-16 | 92.5 | 21 | 17 |
| JM (JGK) 240-20 | 94.5 | 21 | 21 |
| JM (JGK) 300-12 | 102 | 24 | 13 |
| JM (JGK) 300-16 | 102 | 24 | 17 |
| JM (JGK) 300-20 | 105 | 24 | 21 |
| JM (JGK) 400-16 | 114 | 27 | 17 |
| JM (JGK) 400-20 | 116 | 27 | 21 |
| JM (JGK) 500-16 | 127 | 30 | 17 |
| JM (JGK) 500-20 | 127 | 30 | 21 |
| JM (JGK) 630-16 | 140 | 35 | 17 |
| JM (JGK) 630-20 | 140 | 35 | 21 |
| JM (JGK) 630-22 | 140 | 35 | 23 |
| JM (JGK) 800-22 | 170 | 39 | 23 |
| JM (JGK) 1000-22 | 200 | 44 | 23 |
Xogta Farsamada
Qalabka: E-Cu
Daaweynta dusha sare: qasacad-plated
Hantida Alaabta: Waxaa loo isticmaalaa in lagu xidho dhamaadka kirishbooyada naxaasta.Waxa ay leedahay daaqada wax lagu eegayo si loo eego meesha uu ka socdo.Sababtoo ah fiilooyinka go'doonsan ayaa leh dhexroor ka weyn kan caadiga ah.Waxayna u janjeeraan inay soo baxaan ka dib markay iska siibtaan, lugaha JGB kuwaas oo xadhkaha dhex geliya lugaha oo si fudud u gelisa kirishbooyada.
| Qaabka | L Cabirrada (mm) d Φ | ||
| JM (JGK) 6-5 | 25 | 3.7 | 5.2 |
| JM (JGK) 6-6 | 25 | 3.7 | 6.5 |
| JM (JGK) 6-8 | 25 | 3.7 | 8.4 |
| JM (JGK) 10-6 | 26 | 4.5 | 6.5 |
| JM (JGK) 10-8 | 26 | 4.5 | 8.4 |
| JM (JGK) 10-10 | 28 | 4.5 | 10.3 |
| JM (JGK) 16-6 | 28.5 | 5.7 | 6.5 |
| JM (JGK) 16-8 | 30.5 | 5.7 | 8.4 |
| JM (JGK) 16-10 | 31 | 5.7 | 10.5 |
| JM (JGK) 25-6 | 33.5 | 7.2 | 6.5 |
| JM (JGK) 25-8 | 35 | 7.2 | 8.4 |
| JM (JGK) 25-10 | 35 | 7.2 | 10.5 |
| JM (JGK) 35-6 | 37.5 | 8.5 | 6.5 |
| JM (JGK) 35-8 | 38 | 8.5 | 8.5 |
| JM (JGK) 35-10 | 39 | 8.5 | 10.5 |
| JM (JGK) 35-12 | 39 | 8.5 | 13 |
| JM (JGK) 50-6 | 43.5 | 9.8 | 6.5 |
| JM (JGK) 50-8 | 45 | 9.8 | 8.5 |
| JM (JGK) 50-10 | 45 | 9.8 | 10.5 |
| JM (JGK) 50-12 | 45 | 9.8 | 13 |
| JM (JGK) 70-8 | 50 | 11.5 | 8.5 |
| JM (JGK) 70-10 | 51.5 | 11.5 | 10.5 |
| JM (JGK) 70-12 | 51.5 | 11.5 | 13 |
Xogta Farsamada
Qalab: E-Cu;Al-99.6%
Daaweynta dusha sare: dhalaalaya
Hantida Alaabta: Saamaynta isku-xidhka awgeed marka Aluminiumku uu la kulmo Copper, daxalka wuxuu ku dhici doonaa waqti gaaban gudaheed.Hadda xalka ugu fiican ayaa ah in la isticmaalo isku xirayaasha bimetal ee Aluminium-Copper.Lugta bimetal ah waa in loo adeegsadaa joojinta.Alxanka xajinta si fiican ayaa loo sameeyay.Foostada daboolan waxaa ka buuxsamay isku-dhafan si ay uga fogaato oksaydheynta.
| Qaabka | L cabbirada (mm) | |||
| d | B | Φ | ||
| DTL 10-6 | 62 | 4.8 | 13.5 | 6.5 |
| DTL 16-8 | 70 | 5.8 | 16 | 8.5 |
| DTL 25-8 | 75 | 7.2 | 17.5 | 8.5 |
| DTL 35-10 | 85 | 8.5 | 20 | 10.5 |
| DTL 50-10 | 90 | 9.7 | 23 | 10.5 |
| DTL 70-12 | 102 | 11.5 | 26 | 12.5 |
| DTL 95-12 | 112 | 13.5 | 28 | 12.5 |
| Qaabka | Cabirka (mm) | |||
| L | d | B | Φ | |
| DTL 120-14 | 120 | 15 | 31 | 14.5 |
| DTL 150-14 | 125 | 16.5 | 35 | 14.5 |
| DTL 185-16 | 133 | 18.5 | 37.5 | 17 |
| DTL 240-16 | 140 | 21 | 40 | 17 |
| DTL 300-18 | 160 | 23.5 | 44.5 | 18.5 |
| DTL 400-20 | 170 | 27 | 50 | 21 |
| DTL 500-20 | 225 | 29 | 60 | 21 |
Xogta Farsamada
Hantida Alaabta: Saamaynta isku-xidhka awgeed marka Aluminiumku uu la kulmo Copper, daxalka wuxuu ku dhici doonaa waqti gaaban gudaheed.Waqtigan xaadirka ah xalka ugu fiican waa in la isticmaalo isku xirka Aluminium-Copper laba-birta ah.Lugta bimetal ah waa in loo adeegsadaa joojinta.Alxanka xajinta si fiican ayaa loo sameeyay.Oo fuustadeeda daboolan waxaa ka buuxsamay isku-dhafan si ay uga fogaato oksaydheynta.Imtixaanka nooca waa in la raaco IEC 61238-1.
| Model DTL-2-16-11 | P±0.3 D±0.5 d Cabirrada(mm)0.3 W±0.5 S±0.3 ± 0.3 L± 3 L1 ± | ||||||
| Φ11 | Φ16 | Φ6 | 80 | 40 | Φ20 | 3 | |
| DTL-2-25-11 | Φ11 | Φ16 | Φ7 | 80 | 40 | Φ20 | 3 |
| DTL-2-35-11 | Φ11 | Φ16 | Φ8.5 | 80 | 40 | Φ20 | 3 |
| DTL-2-50-13 | Φ13 | Φ20 | Φ10 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-70-13 | Φ13 | Φ20 | Φ11.5 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-95-13 | Φ13 | Φ20 | Φ13.5 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-120-13 | Φ13 | Φ25 | Φ15 | 115 | 59 | Φ30 | 5.5 |
| DTL-2-150-13 | Φ13 | Φ25 | Φ16.5 | 115 | 59 | Φ30 | 5.5 |
| Qaabka DTL-2-185-13 | P±0.3 D±0.5 d Cabirrada(mm)0.3 W±0.5 S±0.3 ± 0.3 L± 3 L1 ± | ||||||
| Φ13 | Φ32 | Φ18.5 | 122 | 60 | Φ30 | 6 | |
| DTL-2-240-13 | Φ13 | Φ32 | Φ21 | 122 | 60 | Φ35 | 6 |
| DTL-2-300-13 | Φ13 | Φ34 | Φ23.5 | 128 | 65 | Φ35 | 6 |
| DTL-2-400-17 | Φ17 | Φ40 | Φ26 | 160 | 90 | Φ36 | 6 |
| DTL-2-500-17 | Φ17 | Φ40 | Φ30 | 160 | 95 | Φ36 | 6 |
| DTL-2-630-17 | Φ17 | Φ47 | Φ33.5 | 205 | 95 | Φ60 | 10 |
| DTL-2-800 | Φ17 | Φ60 | Φ38.5 | 240 | 110 | Φ80 | 10 |
| DTL-2-1000 | Φ17 | Φ60 | Φ43.5 | 240 | 110 | Φ80 | 10 |
Xogta Farsamada
Qalabka: E-Cu
Daaweynta dusha sare: qasacad-plated
Hantida badeecada: Waxa loo isticmaalaa in lagu xidho isku xidhka kaari naxaasta.
| Model GTY-1-1.5 | LDimensions(mm) d | |
| 20 | 1.9 | |
| GTY-1-2.5 | 20 | 2.8 |
| GTY-1-4 | 20 | 3.2 |
| GTY-1-6 | 25 | 3.7 |
| GTY-1-10 | 30 | 4.5 |
| GTY-1-16 | 35 | 5.7 |
| GTY-1-25 | 40 | 7.2 |
| GTY-1-35 | 45 | 8.5 |
| GTY-1-50 | 50 | 9.8 |
| GTY-1-70 | 55 | 11.5 |
| GTY-1-95 | 60 | 13.7 |
| Model GTY-1-120 | LDimensions(mm) d | |
| 65 | 15 | |
| GTY-1-150 | 70 | 16.7 |
| GTY-1-185 | 75 | 19.2 |
| GTY-1-240 | 80 | 21 |
| GTY-1-300 | 85 | 24 |
| GTY-1-400 | 90 | 27 |
| GTY-1-500 | 100 | 30 |
| GTY-1-630 | 110 | 35 |
| GTY-1-800 | 150 | 39 |
| GTY-1-1000 | 170 | 44 |
Xogta Farsamada
Qalab: E-Cu;Al-99.6%
Daaweynta dusha sare: dhalaalaya
Hantida badeecada: Saamaynta isku-xidhka awgeed marka Aluminiumku la xidhiidho Copper, daxalka wuxuu ku dhici doonaa waqti gaaban.Hadda xalka ugu fiican waa in la isticmaalo isku xirayaasha bimetal ee Aluminium-Copper.Isku xirka bimetal waa in loo adeegsadaa wadajirka.
Alxanka xajinta si fiican ayaa loo sameeyay.Oo foosto aluminium ka daboolan waxaa ka buuxsamay isku-dhafka wadajirka ah si looga fogaado oksidization.
| Model GTL-AL25/CU16 | L Cabirrada(mm) d1 | ||
| 70 | 6.8 | 5.5 | |
| GTL-AL35/CU16 | 76 | 8 | 5.5 |
| GTL-AL35/CU25 | 82 | 8 | 7 |
| GTL-AL50/CU25 | 85 | 9.8 | 7 |
| GTL-AL50/CU35 | 90 | 9.8 | 8.2 |
| GTL-AL70/CU35 | 95 | 11.2 | 8.2 |
| GTL-AL70/CU50 | 100 | 11.2 | 10 |
| GTL-AL95/CU50 | 105 | 13.2 | 10 |
| GTL-AL95/CU70 | 110 | 13.2 | 11.5 |
| GTL-AL120/CU70 | 116 | 14.7 | 11.5 |
| Model GTL-AL120/CU95 | L Cabirrada (mm) d1d | ||
| 118 | 14.7 | 13.5 | |
| GTL-AL150/CU95 | 120 | 16.3 | 13.5 |
| GTL-AL150/CU120 | 122 | 16.3 | 15.5 |
| GTL-AL185/CU120 | 128 | 18.3 | 15.5 |
| GTL-AL185/CU150 | 130 | 18.3 | 17 |
| GTL-AL240/CU150 | 132 | 21 | 17 |
| GTL-AL240/CU185 | 135 | 21 | 19 |
| G TL-AL240/CU240 | 140 | 21 | 21.5 |
| GTL-AL300/CU240 | 145 | 23.3 | 21.5 |
| GTL-AL300/CU300 | 150 | 23.3 | 21.5 |
